Home >> Products >> IEC60529 IPXX Code Tester >> IEC 60529 Spray Nozzle, IPX3/IPX4
IEC60529 IPX3 IPX4 brass water spray nozzle for hand sprayer
  • IEC60529 IPX3 IPX4 brass water spray nozzle for hand sprayer

IEC60529 IPX3 IPX4 brass water spray nozzle for hand sprayer

The IPX3-4 Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate.

Share:
Product Description

Introduction:

The IPX3-4 Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is conveniently positioned by the nozzle. The spray pattern of the nozzle is made to the specifications of IEC 60529. A moveable shield can be put down over a portion of the nozzle for IPX3 or moved out of the spray pattern for IPX4.


Applications:

The Spray Nozzle is an alternative to the Oscillating Tube Tester for establishing the degree of protection against ingress of water. The Spray Nozzle is intended for use on specimens that will not fit within the diameter of the Tube Tester. The primary IEC tests include IPX3 and IPX4 protection against water spraying and splashing water.


IEC60529 IPX3 IPX4 brass water spray nozzle for hand sprayer


Features:

· Spray nozzle made of brass

· Pressure gauge

· Movable shield with counterweight

· Ball valve for water flow regulation

· Water filter

· Hose connector


No.Itemparameter
1Water supplyWater flow rate is 50~150kpa clean water without inclusion.
2Spray nozzle parametersexternal diameter: 102mMspherical diameter: S 75.5mmThere is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°. There are 96 holes in the external circle of holes of which the included angle is 15°.
3Water flow10L/min±5%,Flow meter is adjustable
4Range of pressure gauge0~0.4Mpa
5Baffleremovable
6Pressure gauge0~0.25MPa
7Site requirementsDedicated IP waterproof test room,The ground should be flat with illuminationWith good function of inflow and drainage. Wall installation


Number of Holes121
Diameter of Nozzle Holes0.5mm
MaterialSpray nozzle make of brass
ReferenceIEC60529, IEC60598-1, IEC 60335-1, IEC60745-1


HK Chuangxin Instrument Co., Ltd

Address: F8, Gongle Fenghe Guard, Xixiang Street, Bao'an district, Shenzhen, China

Tel: 0086-0755-23702758

Phone: 0086-13631576199

Website: www.szcx17.net

Email: nancy@szcxmi.com

Skype: whq5658