Home >> Products >> Accessibility Probes >> IEC60529 Test Probe
IEC60529 Test Finger Probe B
  • IEC60529 Test Finger Probe B

IEC60529 Test Finger Probe B

Technical Parameters:

1, Knurled Finger Diameter: 12mm

2, Knurled Finger Length: 80mm

3, Baffle Plate Diameter: 50mm

4, Baffle Plate Length: 100mm

Share:
Product Description

IEC60529 Test Finger Probe B

Product Description

Application:

Household and electrical appliance ,protective test for preventing finger touch or electric shock proof.The standard test refers to this jointed finger that simulates a person's finger ,it is consists of a finger, a middle finger, a finger seat, and an insulated handle. Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance.  jointed finger probe  is mainly manufactured for testing the protection against access to hazardous parts. It is a high-precision probe, which simulates human finger movement.it can be with 10±3 N force if necessary.

IEC60529 Test Finger Probe B

Model Number

CX-T2B

Knurled Finger Length

80mm

Knurled Finger Diameter

12mm

Baffle Plate Diameter

100mm

Baffle Thickness

20mm

Materials

metal,   except where otherwise specified.

 on   linear dimensions

 up   to 25 mm: 0- 0,05 mm; over 25 mm: ± 0,2 mm.

Standard

IEC61032   Fig2,  IEC60950 ,IEC60529 ,IEC60335,IEC60884

Customized

The end of the handle is equipped with a pluggable banana plug and terminal block for electric shock test, or the M6 threaded hole at the end of the handle (used with a push-pull force gauge) for the outer casing protection test.



Instruction:

1.In the standard test, the joint part cannot touch the live parts or the dangerous parts, and the 50mm-20mm baffle cannot enter.

 

2.In the test requirements to prevent access to hazardous parts, the Type B test probe is required to have a thrust of 30 ± 3 N. Generally used in conjunction with push-pull gauges.

 

3.In the anti-shock test, it is necessary to connect and configure the power supply and indicating device: determine whether the grounding wire (three plugs), open the power switch of the tested product, and apply the corresponding thrust.